telescopic steel guard cover protective cover for guide way
The standard structure of reasonable prices
(1) the application of suitable for most industries, width to 900 mm, width is larger must frilled edge, improve the lateral stability. This roof type (3) and ruffled (4) can be done. Worthy of the oblique type (2) the other can run off good make liquid and debris.
Steel telescopic guideway cover the section number, weight and percentage of its operating characteristics are very important. Every single section should be as long as possible. This section can reduce the number of, reduce the cost. Generally the largest tensile and minimum compression ratio should be 3:1 and 5-1
Between (as high as 7:1).
The installation of the steel telescopic guideway cover, fixed
We can provide the installation of the guard and fixed with a variety of solutions, according to customer's actual situation and decide. Each shield section must ensure enclosure bare machine highlights empty. Can run free.
Section steel telescopic guideway cover can be directly by the initial and the end of the day fixed or use additional Angle of fixed block, block (can be internal or external) fixed.
![telescopic steel guard cover protective cover for guide way](/upload/product/1.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/2.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/3.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/4.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/5.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/6.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/7.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/8.jpg)
![telescopic steel guard cover protective cover for guide way](/upload/product/9.jpg)